The BlueEye 3.5-inch USB 2.0 HDD Enclosure with USB Hub and Card Reader isn't your typical external storage solution. This new innovative product by BlueEye is an external USB 2.0 hard drive enclosure with a built in USB 2.0 hub and 9 in 1 card reader. Other than the great protection of your hard disk, now you can connect extra peripherals directly into this BlueEye 3.5-inch USB 2.0 HDD Enclosure and save space on your work desk. This BlueEye comes with the card reader function reading your memory card and transfer the images to computer, no additional cables or power supplies needed.

Features & Specifications:

• Support 3.5 inch HDD up to 400GB
• USB 2.0 high-speed interface
• Built-in USB 2.0 2-Port Hub
• Built-in 9-in-1 card reader
• One touch power switch
• Cool aluminum case
• Easy data transfer between memory card to external hard
• disk/computer
• Support 9 types of the memory card - CFI/II, Microdrive, SMC, MS, MS PRO, MS DUO, MS PRO DUO, MagicGate MS, MagicGate MS Duo, SD, Mini SD, MMC, RS-MMC
• Complies with ATA/ATAPI-6 specification revision 1.0 (PIO mode 0~4, DMA mode 0~2, UDMA mode 0~5)
• Supports 16-bit multi-word DMA mode and Ultra DMA mode interface (Ultra 33/66/100)
• Power supply: external power supply (AC input: 100-240V, DC output: +5V/+12V, 28W (40W peak power))
• Supports Windows 98SE/ ME/ 2000/ XP, Mac OS 8.6 or later version

Card reader supports:

• CompactFlash Type I/II Card (CF)
• IBM MicroDrive (MD)
• SmartMedia Card (SMC)
• Secure Digital Card (SD)
• Mini Secure Digital Card (Mini SD) ** with adapter
• Multimedia Card (MMC)
• Reduce Size Multimedia Card (RS MMC) ** with adapter
• Memory Stick (MS)
• Memory Stick Pro (MS Pro)
• Memory Stick Duo (MS Duo) ** with adapter
• Memory Stick Pro Duo (MS Pro Duo) ** with adapter
• MagicGate Memory Stick (MagicGate MS)
• MagicGate Memory Stick Duo (MagicGate MS Duo)

Packaging:

• 1 x 3.5 inch HDD enclosure
• 1 x HDD stand
• 1 x Software
• 1 x User manual
• 1 x One touch power switch
• 1 x AC adapter
• 6 x Screws

Remarks:
** The 3.5 inch Harddisk could be set any jumper setting such as "MASTER" (Device 0), "Slave" (Device 1) or "Cable Select" (Device 2) for windows recognition.
** For using Windows 98SE & ME, the enclosure should be OFF before starting up your computer, otherwise it cannot be detected by Windows 98SE & ME (as the operating system of SE & ME cannot detect the external hard disk automatically)
** please read the manual carefully before using

** The brand names/trademarks/trade names specified are registered properties of their respective owners.